2025 Generac Power Systems Diesel Industrial Generator, 35kW SD035
- Year 2025
- Make Generac Power Systems
- Model Diesel Industrial Generator, 35kW
- Engine Piston Type: Aluminum | Crankshaft Type: Forged Steel
2025 Generac Power Systems Diesel Industrial Generator, 35kW SD035
2025 Generac Power Systems Diesel Industrial Generator, 35kW SD035
Industrial Generator, 35kW | Diesel | 4.5LAlternators are as important to power generation as engines. Generac's in-house built alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
Available in single-phase or three-phase, the 35kW industrial diesel generator set provides 42-146 amps of power. There are open set, standard enclosure, or Level 1 or 2 acoustic enclosure options. Made with a 4 cylinder engine, it features a Power Zone ® 410 Controller. 35kW generators have the power to backup essential equipment in small industrial or commercial buildings.
Features may include:
GENERATOR ENCLOSURE- Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
- Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
- Generac engineers its generator controls with safety and convenience as top priorities.
Engine
Engine Manufacturer
Generac
Emissions
EPA Emissions Compliance: Stationary Emergency | EPA Emissions Reference: See Emission Data Sheet
Cylinder Liners
4 | Cylinder Head: Cast Iron OHV
Engine Type
In-Line | Intake Air Method: Turbocharged/Aftercooled
Displacement
207.48 in3 (3.4 L)
Bore
3.86 in (98 mm)
Stroke
4.45 in (113 mm)
Compression Ratio
18.5:1
Engine
Piston Type: Aluminum | Crankshaft Type: Forged Steel
Lubrication
Oil Pump Type: Gear | Oil Filter Type: Full Flow Cartridge
Cooling
Type: Closed Recovery | Fan Type: Pusher | Water Pump Type: Pre-Lubed, Self Sealing
Fuel System
Fuel Type
Ultra Low Sulfur Diesel Fuel #2
Fuel System
Specifications: ASTM | Filtering (Microns): 10 | Pump Type: Engine Driven Gear
Fuel Injection
Pump: Bosch (VE) | Type: Pintel
Drivetrain
Governor
Electronic Isochronous | Frequency Regulation (Steady State): ±0.25%
Battery
Battery
Size: See Battery Index 0161970SBY | Voltage: 12 VDC | Ground Polarity: Negative
Electric
Electrical
System Voltage: 12 VDC
Alternator
Model: Generac 390 mm | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% (3-Phase) | Telephone Interference Factor (TIF): < 50 | Standard Excitation: Synchronous Brushless | Bearings: Single Sealed Cartridge | Coupling: Direct via Flexible Disc | Load Capacity - Standby: 100% | Voltage Regulator Type: Digital | Number of Sensed Phases: All | Regulation Accuracy (Steady State): ±0.25%
Operational
Fan Speed
Cooling: 2,250 RPM
Hydraulics
Maximum Pressure
Injector Type: 2,100 psi (14,479 kPa)
Dimensions
Fan Diameter
22 in (560 mm)
Dimensions
Fuel Supply Line: 0.312 in (7.92 mm) NPT | Fuel Return Line: 0.312 in (7.92 mm) NPT
Capacities
Oil capacity
Crankcase Capacity: 7.4 qt (7 L)